Skip to main content

Camera: Focus

We've seen that a real image is formed by light moving through a convex lens. The nature of this real image varies depending on how the light travels through the lens. This light path depends on two major factors:

  • The angle of the light beam's entry into the lens
  • The structure of the lens
The angle of light entry changes when you move the object closer or farther away from the lens. You can see this in the diagram below. The light beams from the pencil point enter the lens at a sharper angle when the pencil is closer to the lens and a more obtuse angle when the pencil is farther away. But overall, the lens only bends the light beam to a certain total degree, no matter how it enters. Consequently, light beams that enter at a sharper angle will exit at a more obtuse angle, and vice versa. The total "bending angle" at any particular point on the lens remains constant.

camera lens diagram

As you can see, light beams from a closer point converge farther away from the lens than light beams from a point that's farther away. In other words, the real image of a closer object forms farther away from the lens than the real image from a more distant object.

You can observe this phenomenon with a simple experiment. Light a candle in the dark, and hold a magnifying glass between it and the wall. You will see an upside down image of the candle on the wall. If the real image of the candle does not fall directly on the wall, it will appear somewhat blurry. The light beams from a particular point don't quite converge at this point. To focus the image, move the magnifying glass closer or farther away from the candle.

camera lens diagram

This is what you're doing when you turn the lens of a camera to focus it -- you're moving it closer or farther away from the film surface. As you move the lens, you can line up the focused real image of an object so it falls directly on the film surface.

You now know that at any one point, a lens bends light beams to a certain total degree, no matter the light beam's angle of entry. This total "bending angle" is determined by the structure of the lens.

Labels:

Comments

Post a Comment

Popular posts from this blog

How Google Fiber Works

Some of us are old enough to recollect a time when everyone on the Internet used it through a dial-up connection. Your computer connected to a modem that noisily calls the phone number of an  ISP (Internet Service Provider) to allow you connect at 56 kilobits per second, if you were quite fortunate to have a faster modem. Web pages  load slowly onto pc screens.Pictures usually use a lot of time to fully show up. Software usually take hours to fully download. If you do not have a dedicated phone line, you would tie up the line, and the connection may trigger off if someone calls the phone line. We used  more of text than other bandwidth-hungry media out of need. Recently Internet connection speeds have increased tremendously from the use of broadband connections using technologies like cable and DSL (Digital Subscriber Lines) and 4G or LTE .  According to the FCC's standards, the new goal is for all household to have access to broadband with a minimum speed of...
3 comments
Read more

How Haptic Footwear Works

Wearable devices   are the coolest thing in electronics now. A lot of us are already using a contraption that monitors our steps and other fitness parameters. A wearable around for years is now in on the embedded electronics trend,is the shoe. Electronics in or on shoes are not totally strange concepts. We have seen shoes that light up when walking and shoe sensors that link up with fitness apps. And researchers have been working on several other handy features into footwear,such as  GPS tracking  to assist in knowing the whereabouts of Alzheimer's patients, sensors and wireless signals to assist in locating firefighters and other emergency workers in places where GPS may fail. Very Soon, we will have shoes that communicate with us using a   haptic feedback . You may not have thought about it , but haptic feedback is already around you,some of the experiences include vibrating actuators present in numerous cellphones, tablets and game controllers. This tran...
2 comments
Read more

How to Make Robots 3

Lesson 3 – Making Sense of Actuators What is an actuator? An “actuator” can be defined as a device that converts energy (in robotics, that energy tends to be electrical) into physical motion. The vast majority of actuators produce either rotational or linear motion. For instance, a “DC motor” is therefore a type of actuator. Choosing the right actuators for your robot requires an understanding of what actuators are available, some imagination, and a bit of math and physics. Rotational Actuators As the name indicates, this type of  actuators  transform electrical energy into a rotating motion. There are two main mechanical parameters distinguishing them from one another: (1) torque, the force they can produce at a given distance (usually expressed in N•m or Oz•in), and (2) the rotational speed (usually measured in revolutions per minutes, or rpm). AC Motor AC (alternating current) is rarely used in mobile robots since most of them are powered with dire...
Post a Comment
Read more