Skip to main content

Cell-phone Frequencies

In the dark ages before cell phones, people who really needed mobile-communications ability installed radio telephones in their cars. In the radio-telephone system, there was one central antenna tower per city, and perhaps 25 channels available on that tower. This central antenna meant that the phone in your car needed a powerful transmitter -- big enough to transmit 40 or 50 miles (about 70 km). It also meant that not many people could use radio telephones -- there just were not enough channels.

The genius of the cellular system is the division of a city into small cells. This allows extensive frequency reuse across a city, so that millions of people can use cell phones simultaneously.

A good way to understand the sophistication of a cell phone is to compare it to a CB radio or a walkie-talkie.

  • Full-duplex vs. half-duplex - Both walkie-talkies and CB radios are half-duplex devices. That is, two people communicating on a CB radio use the same frequency, so only one person can talk at a time. A cell phone is a full-duplex device. That means that you use one frequency for talking and a second, separate frequency for listening. Both people on the call can talk at once.

  • Channels - A walkie-talkie typically has one channel, and a CB radio has 40 channels. A typical cell phone can communicate on 1,664 channels or more!

  • Range - A walkie-talkie can transmit about 1 mile (1.6 km) using a 0.25-watt transmitter. A CB radio, because it has much higher power, can transmit about 5 miles (8 km) using a 5-watt transmitter. Cell phones operate within cells, and they can switch cells as they move around. Cells give cell phones incredible range. Someone using a cell phone can drive hundreds of miles and maintain a conversation the entire time because of the cellular approach.

Half Duplex Radio
In half-duplex radio, both transmitters use the same frequency. Only one party can talk at a time.
Full Duplex Radio
In full-duplex radio, the two transmitters use different frequencies, so both parties can talk at the same time.
Cell phones are full-duplex.


In a typical analog cell-phone system in the United States, the cell-phone carrier receives about 800 frequencies to use across the city. The carrier chops up the city into cells. Each cell is typically sized at about 10 square miles (26 square kilometers). Cells are normally thought of as hexagons on a big hexagonal grid, like this:


Because cell phones and base stations use low-power transmitters, the same frequencies can be reused in non-adjacent cells. The two purple cells can reuse the same frequencies.


Each cell has a base station that consists of a tower and a small building containing the radio equipment. We'll get into base stations later. First, let's examine the "cells" that make up a cellular system.

Labels:

Comments

Post a Comment

Popular posts from this blog

How Google Fiber Works

Some of us are old enough to recollect a time when everyone on the Internet used it through a dial-up connection. Your computer connected to a modem that noisily calls the phone number of an  ISP (Internet Service Provider) to allow you connect at 56 kilobits per second, if you were quite fortunate to have a faster modem. Web pages  load slowly onto pc screens.Pictures usually use a lot of time to fully show up. Software usually take hours to fully download. If you do not have a dedicated phone line, you would tie up the line, and the connection may trigger off if someone calls the phone line. We used  more of text than other bandwidth-hungry media out of need. Recently Internet connection speeds have increased tremendously from the use of broadband connections using technologies like cable and DSL (Digital Subscriber Lines) and 4G or LTE .  According to the FCC's standards, the new goal is for all household to have access to broadband with a minimum speed of...
3 comments
Read more

How sonar works

Sonar(sound navigation and ranging) is the use of an echo.If an animal or machine makes a noise, it sends out sound waves into the space surrounding it. The waves bounce back off objects in its path, and some are reflected back to the source of the sound. It's the reflected sound waves that you perceive when your voice echoes back to you in an empty room.  Whales and special machine use reflected waves to locate distant objects(Echo location) and detect their shape and movement. The range and limit of low-frequency sonar is astonishing. Dolphins and whales can differentiate between very small objects size of a pellet 50 feet (15 meters) away, and they use sonar more than sight to locate their food, families, and direction.Whales send signals out bin the range 160 to 190 Db.Bats also use it to locate prey and navigate from obst...
Post a Comment
Read more

How Haptic Footwear Works

Wearable devices   are the coolest thing in electronics now. A lot of us are already using a contraption that monitors our steps and other fitness parameters. A wearable around for years is now in on the embedded electronics trend,is the shoe. Electronics in or on shoes are not totally strange concepts. We have seen shoes that light up when walking and shoe sensors that link up with fitness apps. And researchers have been working on several other handy features into footwear,such as  GPS tracking  to assist in knowing the whereabouts of Alzheimer's patients, sensors and wireless signals to assist in locating firefighters and other emergency workers in places where GPS may fail. Very Soon, we will have shoes that communicate with us using a   haptic feedback . You may not have thought about it , but haptic feedback is already around you,some of the experiences include vibrating actuators present in numerous cellphones, tablets and game controllers. This tran...
2 comments
Read more